Coatings need dry, mild weather to set, and the long wet season can narrow the window. Roofers often schedule coating work in the drier months. Call the number on this page to be connected with a local roofing contractor in Redmond.

What roofs get coated
Coatings go over modified bitumen, single-ply membranes, metal panels and some built-up roofs. Each surface needs the right primer and product. A coating that sticks well to one material may fail on another, so matching is key. A roofer may test a small area first when the surface is unclear.
Coatings and budgets
For owners facing a tight budget, a coating on a sound roof costs far less than tearing off and replacing it. It does not erase the roof's age, though. A roofer can help you plan for eventual replacement even while you coat. A roofer can help you plan for that day.
Much of the housing here dates to the 1980s, so low-slope roofs may carry old layers and patches that a roofer must assess before coating anything.
When a coating is not enough
If insulation is soaked, the deck is soft or the surface is blistered across large areas, coating will not help. Water already inside the roof stays there. In those cases, a roofer will usually recommend repairing sections or replacing the roof. Ask the roofer to show you the evidence.
Thickness and number of coats
Protection depends on how much material ends up on the roof. A thin film wears quickly, while the manufacturer's recommended thickness lasts longer. Ask the roofer how thickness is measured and checked during application. Ask for the number in writing, along with the product's data sheet.
If water is coming in today
Stay off the roof. Set a bucket under any drip, move belongings, photograph the stain and call a roofer. A coating cannot stop an active leak, so a roofer may first patch or cover the area as a temporary fix. Call during dry hours if possible.
Local details for Redmond
On permits, the City of Redmond permit office says: residential work exempt from permit includes light weight roof covering (composition, metal or similar) where installed unit weight is less than 4 pounds per square foot.
Washington L&I registers construction contractors. Its free lookup shows whether a roofer's registration is active and whether there are claims against it.
Months of steady rain, shaded roofs and mild temperatures make moss and debris a constant here. Gentle removal is better for shingles than a pressure washer.
Electric service here comes from PSE (outages: 888-225-5773). Keep away from any line touching the house or a fallen tree.
Much of the housing in Redmond dates to the 1980s or earlier, so a tear-off can uncover older layers or board decking that need extra work.
If the damage came from a storm, write down the date and keep your photos; you may want them for an insurance claim.
Contractors that take calls here usually also work in Kirkland, Bellevue and Woodinville.
Around Redmond
Calls come in from across Redmond, including around Overlake, Education Hill, Redmond Town Center.
Downtown Redmond sits just north of Lake Sammamish with the Sammamish River along its west edge.
Roof Coating questions in Redmond
How long does a roof coating last?
Can any roof be coated?
What does a roofer do before coating?
How do I check a roofer is registered in Washington?
More roofing services in Redmond
Roof Coating nearby
Helpful guides
Sources
Last updated: