Inspect a roof when you buy or sell, after a big storm, when it is getting old, or before the wet season starts. The inspection finds problems while they are still small. Call the number on this page to be connected with a local roofing contractor in Redmond.

Buying a house
A general home inspector looks at the roof briefly, often from the ground. A roofer goes deeper, checking flashing, decking and remaining life. Findings can inform your offer, repair requests or a replacement budget. Schedule it early, since sale timelines are short and roofers book up. Keep every invoice and report together.
Condition of the roof covering
- Granule loss and bare patches
- Cracking and curling
- Fastener problems
- Sealant failures
- Previous patching
Together these tell the roofer how much service life remains. Any concern you have is worth raising during the visit. Findings may point to work other than roofing, such as gutters.
Much of the housing in Redmond dates to the 1980s, so an inspection may find older layers, board decking and original flashing that deserve a closer look.
Is an inspection ever unnecessary?
If you already know the roof is failing, you may skip straight to replacement bids. But even then an inspection documents conditions and decking, so replacement quotes are based on real findings, not assumptions. An honest roofer will say when no work is needed. Early attention usually keeps repairs small.
Checking the contractor
Roofing contractors in Washington must be registered with L&I, and you can look up any business online. Get the scope of the inspection in writing, including whether the attic is covered and whether a report will be provided. Roof age and material shape what the roofer looks for.
Do not pressure wash beforehand
Some owners clean the roof before an inspection. Pressure washing strips granules and forces water under shingles, causing the damage you hoped to avoid. Let the roofer see the real condition and recommend a safe cleaning method if one is needed. Ask what a safe cleaning would involve.
Local details for Redmond
On permits, the City of Redmond permit office says: residential work exempt from permit includes light weight roof covering (composition, metal or similar) where installed unit weight is less than 4 pounds per square foot.
Washington requires roofing contractors to register with the Department of Labor & Industries. L&I's Verify a Contractor tool shows a company's registration status before you sign anything.
Months of steady rain, shaded roofs and mild temperatures make moss and debris a constant here. Gentle removal is better for shingles than a pressure washer.
Storm took out power too? Report it to PSE at 888-225-5773, and stay clear of any downed line.
Much of the housing in Redmond dates to the 1980s or earlier, so a tear-off can uncover older layers or board decking that need extra work.
Contractors that take calls here usually also work in Kirkland, Bellevue and Woodinville.
Around Redmond
Calls come in from across Redmond, including around Overlake, Education Hill, Redmond Town Center.
Downtown Redmond sits just north of Lake Sammamish with the Sammamish River along its west edge.
Roof Inspection questions in Redmond
Do I need to be home for the inspection?
What is the difference between a home inspector and a roofer?
How often should a roof be inspected?
What should I do after a storm?
More roofing services in Redmond
Roof Inspection nearby
Helpful guides
Sources
Last updated: