Commercial roofing covers repair, recoating and replacement of low-slope and flat roofs on stores, offices, warehouses and multifamily buildings. In Seattle, long wet seasons make drainage, seams and flashing the main concerns. Call the number on this page to be connected with a local roofing contractor in Seattle.

What counts as commercial roofing
Most commercial buildings use low-slope or flat roof systems rather than shingles. Common types include single-ply membranes such as TPO and PVC, modified bitumen and torch-down sheets, and built-up roofing made of layered felts and asphalt. Some buildings use standing-seam metal. Multifamily and condo buildings are often grouped with commercial work because they use similar systems and larger crews.
Common problems on Seattle commercial roofs
- Ponding water that sits for days after rain, stressing seams
- Open or split seams at penetrations, curbs and rooftop units
- Clogged drains and scuppers from leaves and needles
- Moss and algae on shaded or north-facing sections
- Membrane punctures from foot traffic by HVAC or service workers
Seattle's rainy season runs from October through March, and winter windstorms can lift edges and loosen flashing. A building that looks fine in August can show leaks in the first week of heavy fall rain, so many property managers book inspections before the wet season starts.
What the process usually looks like
A contractor walks the roof, checks membrane condition, drains, flashing and rooftop equipment, and often takes moisture readings or core samples. Options then range from patching and seam repair, to a restoration coating, to a tear-off and new system. The contractor will usually ask the building's age, past repairs, tenant sensitivity to leaks and whether insurance or a lender needs documentation. See roof coating for restoration options and TPO roofing or torch-down roofing for replacement systems.
What it can cost
Roof Crafters publishes national commercial replacement ranges per square foot: single-ply about $7.50 to $13.50, modified bitumen about $9.50 to $15.75, and built-up about $12.50 to $22.25. These are national figures, not Seattle quotes. Size, access, insulation, drainage changes and tear-off depth all affect a real bid.
Permits, safety and hiring
Seattle SDCI says replacing roof cover, sheathing or insulation on commercial and multifamily projects requires a permit, so ask who will pull it. Washington requires fall protection when workers face a fall of four feet or more, and roofing contractors must be registered with L&I. Check registration on Verify a Contractor, get written bids with scope and materials, and ask about manufacturer warranties on the materials. Tenants and staff should stay off the roof; call a roofer rather than inspecting it yourself.
Commercial Roofing questions from Seattle homeowners
Does commercial reroofing need a permit in Seattle?
What is the difference between repair and recoating?
Can my property manager call a roofer for a leak at night?
How often should a flat commercial roof be inspected?
Related roofing services in Seattle
Helpful guides
Commercial Roofing in nearby cities and towns
King County
Snohomish County
Pierce County
Kitsap County
Island County
Mason County
Jefferson County
Sources
Last updated: