Metal can often be installed over an existing shingle roof, but many roofers prefer a tear-off so they can inspect and fix the deck. The decision depends on layers, condition and local rules. Call the number on this page to be connected with a local roofing contractor in Medina.

Finishes and colors
Factory-baked paint systems resist fading and chalking, and manufacturers publish finish warranties. Darker colors run warmer, lighter ones cooler, and some finishes reflect heat. View samples on the actual house in daylight, because metal reflects sky and trees differently than shingles do. Ask for the finish warranty paperwork.
Rain and snow noise on metal
Metal roofs over solid sheathing, underlayment and insulated attics are quieter than most owners expect. Open framing like carports and barns is louder. If sound worries you, ask the roofer about deck type, underlayment and insulation before choosing a panel. Test the plan with a sample.
Converting from shingles to metal
- The roofer inspects layers and decking.
- Old shingles are removed, or battens go over them.
- Underlayment and flashing are installed.
- Panels and trim are fastened in sequence.
Ask which approach the roofer recommends. Ask which approach the roofer recommends, and have the plan written into the quote.
Useful local facts for Medina
If the job grows from a patch into a full reroof or framing repair, check with the Medina Development Services before work starts.
Before work begins, look the company up on L&I's Verify a Contractor page. Washington requires construction contractors, roofers included, to be registered.
Months of steady rain, shaded roofs and mild temperatures make moss and debris a constant here. Gentle removal is better for shingles than a pressure washer.
Storm took out power too? Report it to PSE at 888-225-5773, and stay clear of any downed line.
Find the age of the roof if you can (closing papers or old receipts help) and note where any water shows up inside.
Calls from Medina are often matched with roofers who also cover Bellevue, Mercer Island and Kirkland.
Complex roofs add labor
Hips, valleys, dormers and multiple penetrations require custom trim and slow the crew. A simple gable costs less per square than a cut-up roof. Share photos or plans so the roofer can see the geometry and price the details. Ask the roofer for the price on each section.
Scratches, dents and touch-up
A fallen branch can scratch the coating or dent a panel. Small scratches can often be touched up with manufacturer paint, while larger damage may require replacing a panel. Photograph the problem and ask a roofer to look before water finds the bare metal. Match touch-up paint to the code on the original panels.
Metal Roofing questions in Medina
What is the difference between standing seam and corrugated metal?
Does a metal roof need a permit?
Can I walk on a metal roof?
Does metal make the house hotter or colder?
More roofing services in Medina
Metal Roofing nearby
Helpful guides
Sources
Last updated: