TPO is a single-ply membrane made from thermoplastic polyolefin, usually white, with seams that a roofer welds together with hot air. It is rolled across the roof in wide sheets. Call the number on this page to be connected with a local roofing contractor in Medina.

Types of TPO in the field
Membranes come in different thicknesses, reinforced with fabric or polyester scrim. Thicker sheets resist punctures and foot traffic better. A roofer can explain which version suits a roof that sees heavy use or lots of falling debris. Ask which thickness the roofer recommends and why it suits your building.
Common seam problems
- Cold welds that never fully fused
- Burned or wrinkled seam edges
- Dirt or moisture trapped in the overlap
- Unsealed cut edges on reinforced sheets
Any of these can open over time and let water in. A careful roofer rechecks seams, since small flaws are easy to fix before leaving.
Estimate items worth comparing
- Membrane thickness and color
- Fastened, adhered or ballasted attachment
- Insulation and slope plan
- Flashing, edge metal and drains
Compare these before looking at the totals. A detailed estimate lists each item separately, so you can see where two bids differ, and why one costs more than another.
Permits, weather and roofs in Medina
If the job grows from a patch into a full reroof or framing repair, check with the Medina Development Services before work starts.
A quick check that pays off: enter the contractor's name in L&I's online verify tool to confirm an active Washington registration.
Fall and winter windstorms are the main source of sudden roof damage around Puget Sound. Lifted tabs and loose ridge caps are worth a look after a blow.
Storm took out power too? Report it to PSE at 888-225-5773, and stay clear of any downed line.
Before you call, note how many stories the house is and snap photos of the problem spots from the ground. It helps the roofer plan ladders and materials.
Nearby, the same kind of help is available in Bellevue, Mercer Island and Kirkland.
Wind and the edges of the roof
Wind tries to lift a single-ply roof at its edges and corners. Roofers often add fasteners or heavier edge metal in those zones. Where gusts run strong, ask how the edge is anchored and tested. Walls and rooflines nearby can also change how gusts hit the corners.
Questions about manufacturer warranties
Warranties on membranes vary in length and coverage, and some require approved installers or products. Ask what the warranty covers, what voids it and who files a claim. Keep the paperwork with your building records. Ask the roofer to explain any workmanship coverage separately from the manufacturer's coverage.
TPO Roofing questions in Medina
What is the difference between TPO and torch-down?
Is TPO better than EPDM?
Can TPO go over an old roof?
Does TPO need a permit?
More roofing services in Medina
TPO Roofing nearby
Helpful guides
Sources
Last updated: