Yes, many homeowners replace shakes with architectural asphalt, metal or composite shake-style products, though the roof deck and any old spaced boards need to be handled correctly first. Local roofers can explain which options suit the house. Call the number on this page to be connected with a local roofing contractor in Stanwood.

Is it time for a roofer?
A few split shakes after a storm are a small fix. Shakes that crumble when touched, a roof that feels spongy under the eaves, or stains on ceilings under the shake slope suggest the problem has moved past the surface and needs a professional opinion soon.
How installation shapes lifespan
Shakes need airflow behind them to dry, which is why traditional installs use spaced boards or a ventilated gap. Roofs laid tight over solid decking tend to stay wet longer. That difference often explains why two neighbors with similar roofs see very different wear. Replacing shakes alone rarely fixes that.
Homes near the water here face steady wind-driven rain and salt air, which wear fasteners and flashing faster than shakes inland.
Getting comparable quotes
Ask each roofer to quote the same scope: tear-off or overlay, underlayment type, flashing replacement and disposal. Wood roofs make this extra important, since the lowest bid may skip decking repairs that surface later as an expensive surprise. A written scope helps when conditions below the shakes turn out differently than expected.
Matching new shakes to old
Fresh cedar looks bright against weathered neighbors, then fades toward gray over time. Roofers can pick grades and thickness that blend as well as possible, though some color difference is normal early on. Ask what to expect before the work begins. Expect a slight difference.
Safe steps before you call
Stay off the roof; wet cedar is extremely slippery. Look from the ground or with binoculars, check the attic with a flashlight, and set a bucket under any drip. Take clear photos of damaged shakes, stains and any fallen pieces to share with the roofer.
Local details for Stanwood
If the job grows from a patch into a full reroof or framing repair, check with the City of Stanwood permit office before work starts.
Before work begins, look the company up on L&I's Verify a Contractor page. Washington requires construction contractors, roofers included, to be registered.
Homes near the water around Stanwood take more wind and salt exposure, which wears metal flashing and fasteners faster.
Most roof trouble in this part of Washington shows up in the wet season, when a small gap in flashing or a lifted shingle has months of rain to work on.
Storm took out power too? Report it to Snohomish PUD at 425-783-1001, and stay clear of any downed line.
Because Stanwood is farther from the core of the metro, scheduling can take a little longer and some companies add a trip charge; ask when you call.
Nearby, the same kind of help is available in Marysville, Camano Island and Langley.
Cedar Shake Roofing questions in Stanwood
How long do cedar shakes last in this climate?
Is moss on cedar shakes a problem?
Should I pressure wash my cedar roof?
Can I switch from cedar shakes to asphalt shingles?
More roofing services in Stanwood
Cedar Shake Roofing nearby
Helpful guides
Sources
Last updated: