Roofing referrals for Seattle & nearby townsCall: (206) 984-7830
(206) 984-7830

Chimney Flashing Repair in Silverdale, WA

roofingseattle.net

Rusted flashing and crumbling mortar often show up together around Silverdale, and the right repair depends on which came first.

Leak beside the chimney in Silverdale?
Call now to be connected with a local roofing contractor in Silverdale.
(206) 984-7830

Water near a chimney can come from the flashing, the mortar joints, the cap or the crown, so the cause needs confirming before anything is replaced. A roofer can narrow it down. Call the number on this page to be connected with a local roofing contractor in Silverdale.

A brick chimney with new metal flashing installed on a shingled roof, chimney flashing repair in Silverdale, WA

Flashing leak or mortar leak?

Flashing leaks tend to show at the roofline, around the base of the chimney. Mortar and brick leaks arrive through the chimney body and can appear higher up. Dampness on the outside brick above the roof points to masonry, not metal.

Surface-mounted versus cut-in

Some repairs press a caulked metal strip onto the brick face. That is faster, but caulk fails in a few seasons. Cutting the flashing into the mortar joint and sealing it holds better and lasts longer. Ask which method a roofer proposes and why.

Needles and moss from tall firs and cedars collect behind chimneys and hold water against the metal and mortar, so cleaning and repair often go together here.

Call now to be connected with a local roofing contractor in Silverdale.
(206) 984-7830

Roof notes for Silverdale

On permits, the Kitsap DCD says: roofing permit required for residential if it includes structural work or more than 2,100 square feet of roofing materials are being replaced; always required for commercial.

Before work begins, look the company up on L&I's Verify a Contractor page. Washington requires construction contractors, roofers included, to be registered.

Months of steady rain, shaded roofs and mild temperatures make moss and debris a constant here. Gentle removal is better for shingles than a pressure washer.

Tall evergreens around Silverdale drop needles that fill valleys and gutters and keep roofs shaded and damp, which is where moss starts.

Electric service here comes from PSE (outages: 888-225-5773). Keep away from any line touching the house or a fallen tree.

Write down when the leak appears: every rain, only in wind-driven rain, or only after snow. That detail points straight to the cause.

Contractors that take calls here usually also work in Poulsbo, Suquamish and Seabeck.

Scaffolding and access

Tall chimneys on steep, high roofs demand ladders, roof jacks or staging, which adds labor and sometimes a separate charge. A chimney on a low, easy slope is quicker to reach. Photos of the roof and stack help the roofer estimate beforehand.

Questions for the roofer

  1. Is the leak at the flashing or in the masonry?
  2. Will the counter-flashing be cut into the mortar?
  3. Does this chimney need a cricket?
  4. Do you coordinate with a mason?
  5. How will the shingles be tied in?

After a windstorm

Strong winter winds can lift flashing, knock a cap loose or shift a tall stack. From the ground, look for bent metal, missing pieces and fresh gaps. Photograph them and collect anything fallen. Those records help the roofer and any insurance conversation.

Chimney Flashing Repair questions in Silverdale

Why does my chimney leak where it meets the roof?
Brick and wood move at different rates, so the joint between them opens over time. Rusted flashing, dried sealant and a missing cricket are the usual causes.
What is the difference between step flashing and counter-flashing at a chimney?
Step flashing is layered with the shingles along the chimney sides. Counter-flashing is set into the mortar above and covers the top edge of the base metal.
Do I need a mason or a roofer?
Often both. A roofer handles flashing, shingles and a cricket, and a mason repairs brick, mortar and crowns. A roofer can say which applies.
Does my chimney need a cricket?
Wide chimneys, generally those wider than a typical flue stack, benefit from one. A roofer can measure and recommend what suits your roof.

More roofing services in Silverdale

Chimney Flashing Repair nearby

Call now to be connected with a local roofing contractor in Silverdale.
(206) 984-7830

Last updated:

☎ Call (206) 984-7830