Roofing referrals for Seattle & nearby townsCall: (206) 984-7830
(206) 984-7830

Chimney Flashing Repair in Puyallup, WA

roofingseattle.net

Rusted flashing and crumbling mortar often show up together around Puyallup, and the right repair depends on which came first.

Leak beside the chimney in Puyallup?
Call now to be connected with a local roofing contractor in Puyallup.
(206) 984-7830

A brick chimney and a wood-framed roof expand and settle at different rates, so the joint between them is a common leak point. Roofers rebuild the flashing there, and sometimes a mason repairs the brick. Call the number on this page to be connected with a local roofing contractor in Puyallup.

A brick chimney with new metal flashing installed on a shingled roof, chimney flashing repair in Puyallup, WA

Is it the chimney at all?

A nearby skylight, vent pipe or roof valley can leak and send water along the framing to the chimney area. A careful roofer traces the water from the stain back upslope rather than assuming the brick is guilty.

Settling and wind movement

Tall brick stacks sway slightly in winter storms and shift as the house settles, stressing the flashing line. A chimney leaning even a little, or a visible separation from the house wall, deserves a mason's look in addition to the roofer's.

Call now to be connected with a local roofing contractor in Puyallup.
(206) 984-7830

Reflash with a reroof

If the roof is near replacement, redoing chimney flashing at the same time makes sense, since it can tie directly into new shingles. Ask the roofer to price the chimney as its own line, so you can compare patching now with doing it later.

What the roofer inspects

Expect a close look at the base flashing, counter-flashing, mortar lines, cricket, nearby shingles and the attic. A roofer should show where the water is getting in and say whether the masonry needs a mason. Ask for photos of any problem areas.

Local details for Puyallup

If the job grows from a patch into a full reroof or framing repair, check with the City of Puyallup permit office before work starts.

Washington L&I registers construction contractors. Its free lookup shows whether a roofer's registration is active and whether there are claims against it.

Most roof trouble in this part of Washington shows up in the wet season, when a small gap in flashing or a lifted shingle has months of rain to work on.

Storm took out power too? Report it to PSE at 888-225-5773, and stay clear of any downed line.

If the damage came from a storm, write down the date and keep your photos; you may want them for an insurance claim.

Contractors that take calls here usually also work in Sumner, Fife and Bonney Lake.

Contain the water

Put a bucket beneath any drip, move furniture and rugs aside and keep the fireplace area clear. Photograph the stain with the date. If a ceiling bulges, stay out from under it and call quickly. Water near light fixtures is a hazard.

Chimney Flashing Repair questions in Puyallup

Why does my chimney leak where it meets the roof?
Brick and wood move at different rates, so the joint between them opens over time. Rusted flashing, dried sealant and a missing cricket are the usual causes.
What is the difference between step flashing and counter-flashing at a chimney?
Step flashing is layered with the shingles along the chimney sides. Counter-flashing is set into the mortar above and covers the top edge of the base metal.
What is a chimney cricket?
A cricket, or saddle, is a small peaked structure behind a wide chimney that directs water and debris around it. It prevents pooling on the uphill side.
What does a chimney crown do?
The crown is the sloped concrete slab on top that sheds water away from the flue and brick. Cracks in it let rain soak the stack.

More roofing services in Puyallup

Chimney Flashing Repair nearby

Call now to be connected with a local roofing contractor in Puyallup.
(206) 984-7830

Last updated:

☎ Call (206) 984-7830