Roofing referrals for Seattle & nearby townsCall: (206) 984-7830
(206) 984-7830

Chimney Flashing Repair in Pacific, WA

roofingseattle.net

Where brick meets roof is a classic leak spot, and this page connects Pacific homeowners with independent roofers who fix chimney flashing.

Chimney flashing rusting in Pacific?
Call now to be connected with a local roofing contractor in Pacific.
(206) 984-7830

Water near a chimney can come from the flashing, the mortar joints, the cap or the crown, so the cause needs confirming before anything is replaced. A roofer can narrow it down. Call the number on this page to be connected with a local roofing contractor in Pacific.

A brick chimney with new metal flashing installed on a shingled roof, chimney flashing repair in Pacific, WA

Gaps that widen with age

Brick, mortar and wood move at different rates with moisture and temperature. Over time that movement opens a thin gap along the flashing line. A hairline separation today often becomes a steady drip in a wet winter, so early attention pays off.

Moss, needles and shade

On shaded roofs, moss and needles collect behind a chimney and hold moisture against the flashing and brick. That keeps the joint wet for most of the winter and speeds rust and mortar breakdown. Gentle cleaning is part of many repair visits.

Call now to be connected with a local roofing contractor in Pacific.
(206) 984-7830

Why width matters

A narrow chimney needs only simple flashing, while a wide masonry stack may call for a cricket as well as more metal and shingle work. The wider it is, the more water it blocks and the more labor the repair takes.

Know this about Pacific roofs

Building permits for Pacific homes are handled by the Pacific Community Development. Small repairs often need nothing, while a tear-off, new sheathing or structural work usually does, so ask the roofer who pulls the permit.

Washington requires roofing contractors to register with the Department of Labor & Industries. L&I's Verify a Contractor tool shows a company's registration status before you sign anything.

Most roof trouble in this part of Washington shows up in the wet season, when a small gap in flashing or a lifted shingle has months of rain to work on.

Storm took out power too? Report it to PSE at 888-225-5773, and stay clear of any downed line.

If the damage came from a storm, write down the date and keep your photos; you may want them for an insurance claim.

Contractors that take calls here usually also work in Auburn, Milton and Sumner.

After the repair

Check the ceiling and attic near the chimney during the next steady rain, and again after a windy one. A dry result across different storms is reassuring. Tell the roofer quickly if dampness reappears, because a second path often exists.

Stay off the roof

  • Chimneys sit high, often on steep, mossy slopes
  • Brick near a leak can be loose
  • Metal edges cut
  • Never climb up to caulk it yourself

Look from the ground and the attic, and leave the climb to a roofer.

Chimney Flashing Repair questions in Pacific

What is the difference between step flashing and counter-flashing at a chimney?
Step flashing is layered with the shingles along the chimney sides. Counter-flashing is set into the mortar above and covers the top edge of the base metal.
What is a chimney cricket?
A cricket, or saddle, is a small peaked structure behind a wide chimney that directs water and debris around it. It prevents pooling on the uphill side.
What does a chimney crown do?
The crown is the sloped concrete slab on top that sheds water away from the flue and brick. Cracks in it let rain soak the stack.
How are repair prices decided?
Each independent roofer sets its own price based on chimney size, roof pitch, access and what is damaged. This referral service does not set or quote prices.

More roofing services in Pacific

Chimney Flashing Repair nearby

Call now to be connected with a local roofing contractor in Pacific.
(206) 984-7830

Last updated:

☎ Call (206) 984-7830