Goopy sealant smeared over a joint is a sign of past trouble, not a lasting fix. Proper repair rebuilds the metal and shingle layering. Call the number on this page to be connected with a local roofing contractor in Mukilteo.

Flashing versus worn shingles
Worn shingles leak across a wide area, with granules in the gutters and curling edges. Flashing leaks happen at a single detail, often with an otherwise healthy roof around it. Telling the two apart is the first job of a good roofer.
Drip edge and eave flashing
- Drip edge: a metal lip that directs water into the gutter
- Rake edge: guards the sloped sides of the roof
- Kickout: diverts water away from a wall at the eave
Missing kickouts and bent edges are easy to overlook and common leak causes.
Wind off the water pushes rain sideways into roof joints, and salt air corrodes metal flashing and fasteners, so waterfront roofs may benefit from corrosion-resistant materials.
Why siding gets involved
Wall flashing tucks behind siding, so a proper repair may mean lifting boards, trim or stucco edges. That adds labor and sometimes a separate trade. A roofer should tell you in advance if the siding must be disturbed and who will restore it.
What good work looks like
Properly repaired flashing is layered so each piece sheds water onto the one below it, with shingles overlapping the metal and nails hidden or sealed. Exposed fasteners, smeared tar and flattened shingles around a joint suggest a rushed job.
After a windstorm
Strong winter winds can bend and lift flashing along ridges, walls and edges. From the ground, look for metal sticking up or lying in the yard. Photograph it and keep any fallen pieces. These details help the roofer and any insurance conversation.
Useful local facts for Mukilteo
On permits, the City of Mukilteo permit office says: all re-roofing projects require a permit (even overlays).
A quick check that pays off: enter the contractor's name in L&I's online verify tool to confirm an active Washington registration.
Homes near the water around Mukilteo take more wind and salt exposure, which wears metal flashing and fasteners faster.
Fall and winter windstorms are the main source of sudden roof damage around Puget Sound. Lifted tabs and loose ridge caps are worth a look after a blow.
Storm took out power too? Report it to Snohomish PUD at 425-783-1001, and stay clear of any downed line.
Write down when the leak appears: every rain, only in wind-driven rain, or only after snow. That detail points straight to the cause.
Contractors that take calls here usually also work in Everett, Clinton and Lynnwood.
Roof Flashing Repair questions in Mukilteo
What is roof flashing?
Why do plumbing vent boots crack?
Is it safe to climb up and check flashing myself?
My home is near the water. Does that change anything?
More roofing services in Mukilteo
Roof Flashing Repair nearby
Helpful guides
Sources
Last updated: