Roofing referrals for Seattle & nearby townsCall: (206) 984-7830
(206) 984-7830

Roof Coating in Kent, WA

roofingseattle.net

A coating can add years to a worn but sound low-slope roof, and independent roofers near Kent can tell you whether yours qualifies.

Wondering if a coating will work on your Kent roof?
Call now to be connected with a local roofing contractor in Kent.
(206) 984-7830

Coatings work best on roofs that are still basically watertight, with dry insulation and intact seams. They do not dry out wet decks, replace rotted materials or fix major splits. Call the number on this page to be connected with a local roofing contractor in Kent.

A worker rolls a white elastomeric coating onto a low-slope roof, roof coating in Kent, WA

A coating is a system, not a paint

Good coating work includes cleaning, repairs, primer where needed, reinforcement at seams and flashings, and enough thickness in the final coats. Skipping steps turns a durable layer into a thin film that peels. Ask about each stage. Ask the roofer to walk through each stage in order.

Extending the life of a sound membrane

On single-ply or modified bitumen roofs, a coating shields the surface from sun, wind-blown grit and wear. That can keep the existing roof working longer. The gain depends on how healthy the roof is before the work. Ask the roofer for photos taken before the work begins.

Call now to be connected with a local roofing contractor in Kent.
(206) 984-7830

Coating a failing coating

An old coating that is peeling, flaking or blistered must be removed or stabilized first. Applying new material over loose old film leads to the same peeling. Prep determines how long the new coat lasts. Ask the roofer how old coating will be prepared and which product is compatible.

Thickness and number of coats

Protection depends on how much material ends up on the roof. A thin film wears quickly, while the manufacturer's recommended thickness lasts longer. Ask the roofer how thickness is measured and checked during application. Ask for the number in writing, along with the product's data sheet.

Why coating can fail in wet weather

Rain on fresh product can wash it away or leave a cloudy, weak film. Dew and cool mornings slow drying. A careful roofer checks the forecast, the surface moisture and the product's drying rules before starting each day. Ask what happens to a damaged coat.

Local details for Kent

For permit questions on a reroof, start with the City of Kent permit office. A contractor who works here regularly will know whether your job needs anything filed.

Washington requires roofing contractors to register with the Department of Labor & Industries. L&I's Verify a Contractor tool shows a company's registration status before you sign anything.

Months of steady rain, shaded roofs and mild temperatures make moss and debris a constant here. Gentle removal is better for shingles than a pressure washer.

Electric service here comes from PSE (outages: 888-225-5773). Keep away from any line touching the house or a fallen tree.

Before you call, note how many stories the house is and snap photos of the problem spots from the ground. It helps the roofer plan ladders and materials.

Contractors that take calls here usually also work in Des Moines, SeaTac and Auburn.

Around Kent

Calls come in from across Kent, including around Downtown Kent, East Hill, West Hill.

Kent has the region's wet-winter, dry-summer pattern, with rain on many days from fall through spring.

Roof Coating questions in Kent

Which is better, acrylic or silicone roof coating?
It depends on the roof. Acrylic suits sunny, well-drained roofs, while silicone handles ponding better but is harder to recoat. A roofer can match the product to your surface and drainage.
Will a white coating lower my energy use?
It can reduce heat gain in summer, which helps most in warm, dry weather. In a mild, wet climate, the main benefit is protection and sealing, so do not expect large savings.
Should I coat my roof or replace it?
If the roof is dry, sound and only worn at the surface, coating may be reasonable. If it is wet, failing or very old, replacement is usually the better value. A roofer can compare.
Does a coating affect a manufacturer warranty?
It can. Some membrane warranties limit what can be applied over the roof. Ask the roofer and check your paperwork before coating.

More roofing services in Kent

Roof Coating nearby

Call now to be connected with a local roofing contractor in Kent.
(206) 984-7830

Last updated:

☎ Call (206) 984-7830