Roofing referrals for Seattle & nearby townsCall: (206) 984-7830
(206) 984-7830

Do you need a permit to reroof near Seattle?

roofingseattle.net

Whether a reroof needs a permit depends on where the house sits and what the job involves, and the answer changes from one city to the next. This guide lists what each building office says on its own page, so you can ask the right question before work begins.

Need roofing help now?
Call now to be connected with a local roofing contractor in Seattle.
(206) 984-7830

Whether a reroof needs a permit depends on where the house sits and what the job involves, and the answer changes from one city to the next. This guide lists what each building office says on its own page, so you can ask the right question before work begins.

The short version

There is no single rule across the Seattle area. Many offices exempt a like-for-like residential reroof when the sheathing stays in place. Others set a weight limit, a square-foot limit or a layer limit, and a few require a permit for every reroof. Structural work, such as replacing sheathing, changing the pitch or adding a skylight, tends to trigger a permit almost everywhere. The sections below only repeat what each office states; rules get revised, so confirm with the permit office before you sign a contract. Roofing Seattle is a referral service, not a permit office or a roofing company, and nothing here is legal advice.

Seattle

Seattle's Department of Construction and Inspections states that a re-roof permit is required when repairing an area greater than 500 square feet, and that replacing roof cover, sheathing or insulation on commercial and multifamily projects requires a permit. Re-roof work on one- and two-family homes and townhouses generally does not need a permit if the building envelope is unchanged apart from adding or replacing insulation that is at least as good as the existing; any other envelope change requires a construction permit. SDCI also says insulation must be added to meet current energy code standards when existing roof sheathing or insulation is exposed or roof cavities are uninsulated. The Seattle Residential Code says roof replacement includes removing existing coverings down to the deck, and that re-covering over an existing roof is not allowed where it already has two or more applications of any roof covering, or where it is water-soaked or deteriorated. For job details, see roof replacement in Seattle.

King County and its cities

  • King County (unincorporated areas): the Department of Local Services says replacement of roofing or siding for detached one and two-family houses does not need a permit, unless the property contains critical areas.
  • Bellevue: a roof recover over existing roofing needs no building permit unless it increases roof weight by more than 5 percent, and replacement is exempt when the repaired or replaced substrate is limited to five 4x8 sheets for residential. Bellevue's energy code page adds that insulation must go to full depth when a residential roof replacement exposes the cavity.
  • Bothell: in-kind overlays on one- and two-family dwellings are exempt if the result is at most two layers, and in-kind reroofing is exempt provided sheathing is not removed or replaced. Multifamily and non-residential reroofs need plan review, and torch-down or hot-tar work needs a separate fire permit, per its work-exempt list.
  • Issaquah: a permit is required for a re-roof involving structural elements, including sheathing, skylights, pitch changes, mechanical units or roofing over 10 pounds per square foot. In-kind work without sheathing replacement and a two-layer residential overlay are exempt, per the city's re-roof page.
  • Kirkland: for one- and two-family homes, reroofing is exempt provided sheathing is not removed or replaced; the exemptions do not apply in areas of flood hazard, wetland or steep slope, according to its permit guide.
  • Redmond: residential light roof covering, such as composition or metal under 4 pounds per square foot installed, is on the work-exempt list.
  • Sammamish: a permit is required when sheathing or all existing roofing is replaced or altered; like-for-like covering replacement or adding composition to two layers total is exempt, per the reroof permit sheet.
  • Mercer Island: single-family re-roof permits are required when sheathing is replaced or the roofing material type changes; no review is required for typical roof replacement, per its permit page.
  • Maple Valley: a permit is required for residential re-roofing that needs sheathing installed or a heavier roofing material than the original, and for commercial, per its permit FAQ.
  • Duvall: a permit is required for a re-roof overlay limited to 2 total layers, and for tear-off and replacement with the same roofing type provided sheathing is not altered, per its permit page.
  • Snoqualmie: a permit is required for reroofs; the city page does not define whether a full replacement counts, so ask.

Snohomish and Island counties

  • Lynnwood: residential in-kind re-roofing does not require a permit provided sheathing is not removed or replaced. Work involving structural elements, or a material change that pushes total weight past 10 pounds per square foot, falls under the re-roof checklist; alteration under 100 square feet and repair are exempt.
  • Mountlake Terrace: a building permit application is used for re-roofs, single-family re-roof permits can be issued over the counter, and an inspection is required before new roofing is applied, per its checklist.
  • Mukilteo: all re-roofing projects require a permit, even overlays.
  • Lake Stevens: the city accepts re-roofing permits online, and composition, metal or similar coverings under 4 pounds per square foot installed are exempt from residential building permits under city ordinance, per its permit center.
  • Monroe: residential roof repairs of less than 200 square feet in any five-year period are allowed without a permit; the page does not address full re-roofing, so confirm with the Permit Division.
  • Snohomish: the city's FAQ says a permit is required for new construction, remodel, repair and similar work but does not specifically address re-roofing, so confirm with the Permit Center.
  • Island County: all roof-covering projects, new and replacement, require a building permit.

Pierce and Kitsap counties and Jefferson County

  • Tacoma: reroofing a single-family or duplex is exempt when the old roofing is removed first, the new roofing weighs no more than 2.5 pounds per square foot, no framing changes are made and the building is not unreinforced masonry. An overlay with no structural or pitch change can go in as an online ePermit, per Tacoma's residential permits page.
  • Puyallup: a building permit is required for a re-roof requiring sheathing of a single-family residence or garage; over 200 square feet requiring sheathing is listed as over the counter or the same business day, per its permit applications page.
  • Pierce County: no permit is required to re-roof a home or private garage with a slope greater than 2 in 12 when the coverings weigh 7.5 pounds per square foot or less in total; the exemption does not apply to replacing sheathing, per its FAQ.
  • Bremerton: single-family re-roofs are exempt when the roof is less than 4,000 square feet and only the roofing material is replaced with no structural changes, per its permit guide.
  • Port Orchard: the online roofing permit application covers residential reroofing of 21 squares (2,100 square feet) or more and any commercial reroof, and cannot be used with structural work, per its application page.
  • Kitsap County: a roofing permit is required for residential work that includes structural work or more than 2,100 square feet of roofing materials, and always for commercial, per its permit brochure.
  • Jefferson County: when the roof type and pitch do not change and the trusses are not touched, re-roof permits are over the counter; otherwise you are directed to the Permit Tech, per its FAQ.

Cities not listed

For a town not listed above, such as Kent, Everett or Federal Way, do not assume anything. Call or check the website of that city's building office and ask whether a reroof of your type needs a permit. If the property is in an unincorporated area, the county's rules apply. You can find your town on our service areas page, and the nearby Tacoma and Kirkland pages show how offices describe local conditions.

Who pulls the permit

When a permit is needed, ask the roofer in writing who is applying for it and whether the fee is in the bid. A registered roofing contractor usually pulls the permit and schedules any inspection, and many owners prefer that. Whoever does it, the permit status should appear in the contract. An unpermitted job can complicate a later sale or an insurance claim. Our guide to hiring a roofer in Washington covers the registration check on L&I.

Permits and the rest of the project

A permit question usually comes up while you are deciding between a patch and a full job. If the roof is only leaking in one spot, roof repair may stay under every threshold above, though you should still ask the office, since some set square-foot limits for repairs. If an older roof has several problems, our guide on when to repair or replace helps you weigh the choice before permit costs enter the picture. A roof inspection before bidding can also show whether decking is likely to need work, which is the detail that most often changes the permit answer.

Why the rules look different

Several offices tie the exemption to whether sheathing is touched, and that is why a good bid separates tear-off from deck repair. Rotted decking found mid-job can turn an exempt reroof into a permitted one in some cities. In wet Seattle-area winters, hidden deck damage under moss is common enough that it should be discussed before work starts. For pricing, see how much a new roof costs in Seattle.

Call now to be connected with a local roofing contractor in Seattle.
(206) 984-7830

Frequently asked questions

Does a new roof in Seattle need a permit?
SDCI states that re-roof work on one- and two-family homes and townhouses generally does not need a permit if the building envelope is unchanged apart from adding or replacing insulation, while repairing an area over 500 square feet, or any other envelope change, calls for a permit. Confirm with SDCI for your job.
Which nearby places require a permit for every reroof?
Mukilteo states that all re-roofing projects require a permit, even overlays, and Island County states that all roof-covering projects, new and replacement, require a building permit.
Does replacing roof decking change the answer?
Often. Several offices, including Kirkland, Bothell, Lynnwood, Sammamish and Pierce County, tie their exemption to sheathing not being removed or replaced.
What if my city is not listed?
Ask that city's building office, or the county if the property is unincorporated, before the work begins. Rules are written by each jurisdiction and can change.
Call now to be connected with a local roofing contractor in Seattle.
(206) 984-7830

Last updated:

☎ Call (206) 984-7830